Counter Flow Evaporative Condenser

KEN- COUNTER FLOW TYPE EVAPORATIVE CONDENSER 

As a typical counter flow evaporative condenser, KEN evaporative condenser offered excellent heat transfer ability. Compact structure design and lower power, make it easier for the confined space shipment and installation. KEN evaporative condenser can be used in all outdoor applications, especially in high temperature fluid process and dirty environment. And the unit can also operate in dry mode without water during low load and cold weather.

KEY BENEFIT

• 100% heat rejection guarantee

• Reliable

• Compact

• Anti freezing

• KEN Characteristics

• Counter flow, axial fan, induced draft

• CTI Standard STD-201(21) Coil Design

• Capacity range100 – 3000KW(For single cell models, nominal R717 KW, suitable to container delivery)

 TYPICAL APPLICATIONS

• Tight encloures, sandy and windy area lnstallations

• Limited plan area installations

• Indoor installations

• Dry operation in winter time

PRINCIPLE OF OPERATION

The refrigerant gas discharges from the compressor into the inlet connection of the KEN evaporative condenser.

Water from the condenser’s sump circulates over the condenser coil, while ambient air is simultaneously drawn the air stream.

The evaporative process cools the spray water, which in turn cools the tubes containing the refrigerant gas. The cool tube walls cause the refrigerant gas to give up heat and condense into a liquid. The condensed liquid flows out of the coil, to the high-pressure liquid receiver for return to the system. The hot, saturated discharge air is drawn through the drift eliminators and discharged into the atmosphere. The water which was not evaporated falls into the sump and recirculates to the water distribution system above the condensing coil section.

As a typical counter flow evaporative condenser, KEN evaporative condenser is original compact, and low horse power. It can guarantee reliable and superb thermal performance, and it is easy for shipment and installation in confined spaces. KEN evaporative condenser can be used for all outdoor applications, especially for high temperature process fluid and dirty environment. And the unit can be operation in dry mode without water, when low load and cold weather.

TECHNICAL SPECIFICATIONS